Cooling Tower Selection Guide
The information we need to size a cooling tower or evaporative condenser.
Find a model
Enter your water flow and conditions to see matching open cooling tower models from our model tables. Know your flow or your heat load; either works. This is a preliminary reference, and a Huake engineer confirms the final selection.
Results appear here.
Based on the Huake open cooling tower model tables (standard conditions shown in the table notes). For closed cooling towers, evaporative condensers and air coolers, send your design conditions through Get a Quote.
Information needed for selection
01
Heat load
Cooling capacity or water flow rate.
02
Temperatures
Inlet and outlet water temperature.
03
Climate
Design wet-bulb temperature at the site.
04
Water
Water quality and make-up source.
05
Site
Noise requirement and installation space.
06
Materials
FRP, 304 or 316 stainless steel.
Open vs. closed circuit
Open circuit tower
Water is cooled directly by air. Lowest first cost; process water is exposed to air and needs treatment.
Closed circuit tower
Process fluid stays in a sealed coil. Protects equipment, reduces water treatment and suits dirty environments.
Ready to size your tower?
Send the inputs above and we will recommend a model.